|THE WAY YOU WANT IT!
NOW YOU CAN! AUTOMATICALLY!
Without a Saw Buddy, you are basically setting your saw conveyor at
a constant feed rate where you can cut acceptable boards with an
optimum speed through hard areas. Thus, you are limited to higher
speeds through softer areas.
Usually, less than 5% of the wood is hard areas that are limiting a
faster feed rate speed.
1. You set the high speed rate (this is the feed rate through the soft
areas) as high as your saw and the wood you are cutting will allow
and still produce acceptable boards.
2. You set the slow speed (this is how slow you choose to cut
through the hard areas).
The Saw Buddy reacts instantly on hydraulically driven conveyors,
and in a fraction of a second
on electrically driven conveyors.
This instant reaction time enables you to program the Saw Buddy to
perform exactly as you want it through a variety of woods and
"If I could just run my saw like I want it to run it"?
|Saw controller for saw lines. Saw controller for small and large bandsaws Saw controller for lumber mills.
Saw controller for pallet companies. Saw controller for precision saw control. Saw controller saves
money. Saw controller saves blades. Saw controller cuts lumber straighter. Saw controller cuts lumber
faster. Saw controller saves electricity.